• Home
  • Categories
  • WIKI
  • LANGUAGE: en
    • Installation Failed
    Community Discussion 4247 views · 26 replies ·
    Tofloor
    poster avatar
    kayoo
    deepin
    2016-06-16 10:25
    Author
    Edited by kayoo at 2016-6-16 02:59

    Hello everyone,

    I've try to install DeepinOS 15.2 on my new computer :  
    - Gigabyte Technology Brix GB-BSi3-6100
    - HyperX Impact HX316LS9IB/8 RAM 8GB 1600MHz DDR3L CL9 SODIMM 1.35V
    - Transcend TS128GMTS800 SSD interne 128 Go M.2 (Type 2280) SATA III

    I've made many installation of Deepin on multiple hardware, but this time I've got this issues :



    Complete Log is available on => http://pastebin.com/K1zzpdag

    And this is the last line of it :
    1. ** (deepin-installer:1925): WARNING **: [run_one_by_one] run hook(/tmp/hooks/in_chroot/02-setup-cdrom-repository.job) failed: Child process exited with code 100
    Copy the Code


    This is what I've try so far:
    - Change mode on BIOS to "legacy"
    - Delete all partition with gParted, and create one with GPT table to mount "/boot/efi"
    - Try to install other distribution (DEBIAN 8 / Ubuntu 16.04 / HandyLinux) and it works !!

    Have you any clue of what going on ? and what should I do.
    I really want to invest myself into this DeepinOS.

    Every help is appreciated.

    Best Regards.
    Reply Favorite View the author
    All Replies
    1 / 2
    To page
    com_bvv
    deepin
    2016-06-17 00:15
    #1
    Try to boot into live...
    Reply View the author
    kayoo
    deepin
    2016-06-17 06:07
    #2
    I already boot in failmode (live) that's how I got the changelog.
    Reply View the author
    kayoo
    deepin
    2016-06-20 07:27
    #3
    no one has any idea ?
    Reply View the author
    elizabeth
    deepin
    2016-06-20 09:44
    #4
    A bad ISO download, hardware conflict with the kernel.

    Did you check to verify a good download?


    ISO MD5
    64-bit：4d43ad25056574ef6a54905098d87e9b
    32-bit：c00d0fa3cdec28d90db9c60ce6481805
    Reply View the author
    jasonstath
    deepin
    2016-06-20 10:08
    #5
    Hi guys, I have the same problem here
    i tried many usb flash and many burning tools always the same thing with direct insatll or with failsafe
    and I checked the MD5
    every thing is normal except the installation
    It's very beautiful and good distro I want to install it soo badely so give us some thing to solve this problem
    thank's
    Reply View the author
    elizabeth
    deepin
    2016-06-20 11:56
    #6
    Does Live mode run?

    Apparently there is a live Mode!

    Says do this on a post.

    When start installer? do it next:
    ALT-F2.
    LANG=EN_en.utf8 startx
    Welcome to Deepin live!

    I was having problems with that in VBox probably because how the Keyboards mapped.

    I was able to edit the boot line by hitting Tab.  Deleted "Live-Installer"  "Chinese Local"  Replaced that with "LANG=EN_en.utf8"

    "Hit Enter"

    And Live desktop came up instead of the Install!

    I'd say if everything works alright in Live Mode, your having a problem with your SSD drive could try a standard SATA drive, USB drive, Thumb drive  to see if it will install.
    Reply View the author
    jasonstath
    deepin
    2016-06-21 01:48
    #7
    Hi again
    I did it I fanaly install my deepin 15.2
    so I change my USB drive and I downloaded new iso from the officiel website but from MEGA(because I think that the version that I downloaded by IDM was damaged even the MD5 was correct)
    any way try this because this system is awsome
    Reply View the author
    zondac
    deepin
    2016-08-02 06:03
    #8
    I've been using 15.1.1 for a while and now i'm trying to instal 15.2 but results with an installation failed message about 80% of progress bar.

    Booting in legacy mode, MD5 check is OK. Tried with different USB sticks, different ISOs from different sources and written with both UNetbootin and Deepin Boot Maker.

    http://pastebin.com/NW3124dD

    Installation worked just fine for 15.1.1. Same partiton, same settings.

    Thanks for any idea.
    Reply View the author
    com_bvv
    deepin
    2016-08-02 09:29
    #9
    try to burn the image using gnome-disk-utility.
    Reply View the author
    stevex
    deepin
    2016-08-02 13:55
    #10
    This does not really solve the problem, but why not just reinstall 15.1 and update and upgrade to 15.2 from there?
    Reply View the author
    zondac
    deepin
    2016-08-03 01:20
    #11
    https://bbs.deepin.org/post/31161
    try to burn the image using gnome-disk-utility.

    But now i have only Windows 10 installed
    Reply View the author
    com_bvv
    deepin
    2016-08-03 02:30
    #12
    https://bbs.deepin.org/post/31161
    But now i have only Windows 10 installed

    Installing Deepin was successful?
    Reply View the author
    zondac
    deepin
    2016-08-03 02:55
    #13
    https://bbs.deepin.org/post/31161
    This does not really solve the problem, but why not just reinstall 15.1 and update and upgrade to 15 ...

    Because I was on 15.1.1 and servers were dead slow. So i've searched and find this page;
    https://bbs.deepin.org/post/30886

    Followed the instructions there and end up with kernel panic. Then formatted. Maybe i should try again.
    Reply View the author
    stevex
    deepin
    2016-08-03 04:14
    #14
    The mirrors are much better now than they were 4 or 5 months ago.Good luck.
    Reply View the author
    zondac
    deepin
    2016-08-03 04:18
    #15
    https://bbs.deepin.org/post/31161
    Installing Deepin was successful?

    15.1.1 was succesful.
    Reply View the author
    lukaszde
    deepin
    2016-08-03 06:32
    #16
    I could not install system when used 15.2 iso. Try to back to 15.1.1, works like charm for me
    Reply View the author
    com_bvv
    deepin
    2016-08-03 08:19
    #17
    That can not be! Take this  http://blog.deepin.org/2016/06/a ... install-latest-iso/  and write correctly!
    Reply View the author
    zondac
    deepin
    2016-08-03 17:34
    #18
    https://bbs.deepin.org/post/31161
    That can not be! Take this  http://blog.deepin.org/2016/06/announcementnow-you-can-install-latest-is ...

    Oh thanks! How the hell did i miss that!
    Reply View the author
    zondac
    deepin
    2016-08-03 17:39
    #19
    https://bbs.deepin.org/post/31161
    I could not install system when used 15.2 iso. Try to back to 15.1.1, works like charm for me

    I'm back to 15.1.1 and then ugraded to 15.2. After update i'm stuck at login screen. After entering password if password is correct, loading circle appears and gets back to login screen else it just says wrong password as normal. Think I should stay with 15.1.1 until a new version releases.
    Reply View the author
    zondac
    deepin
    2016-08-04 02:56
    #20
    https://bbs.deepin.org/post/31161
    I'm back to 15.1.1 and then ugraded to 15.2. After update i'm stuck at login screen. After enterin ...

    It seems like 15.2 upgrade didn't generated my xorg.conf file. And I can't reconfigure it. Now installing 15.1.1 again and not going to update it for a while.
    Reply View the author
    1 / 2
    To page