Your hard drive might be dead

It couldn't find your hard disk partition and threw an error

Hello

A kernel panic is a type of error that occurs when the operating system (OS) of a computer or device detects an error in the kernel, which is the core component of the OS. A kernel panic can be caused by various factors, such as a hardware malfunction, a software bug, or a corrupted system file.

If you are experiencing a kernel panic after an update, it is possible that the update may have introduced a bug or compatibility issue that is causing the kernel panic. Here are some steps you can take to try to resolve the issue:

Restart your computer: Sometimes a kernel panic can be a one-time occurrence and can be resolved by simply restarting your computer.

Boot into Safe Mode: Booting your computer into Safe Mode can help you isolate the cause of the kernel panic. To do this, restart your computer and press and hold the Shift key while it is booting up. This will bring up the boot options menu, and you can select Safe Mode from there. Nexus Iceland Login

Check for software updates: If the kernel panic was caused by a software bug, installing the latest software updates may fix the issue. Check to see if there are any updates available for your OS or any other software you recently installed.

Check hardware components: A kernel panic can sometimes be caused by a hardware malfunction. Check that all hardware components, such as RAM and hard drives, are properly connected and functioning correctly.

Restore from backup: If none of the above steps work, restoring your computer from a backup may be necessary. This will revert your system to a previous state before the update was installed.

If you are unable to resolve the kernel panic issue on your own, you may want to consult with a professional or contact the manufacturer or OS provider for assistance.

The error message you are seeing indicates that the Linux kernel is unable to mount the root file system. This can be caused by a variety of issues, such as a corrupt file system, a faulty hard drive, or a problem with the bootloader.

Here are some steps you can try to fix this issue:

1. Try booting into recovery mode: During boot, hold down the Shift key to access the GRUB menu. From there, select the "Advanced options for Deepin" entry and then select the recovery mode option. This will boot the system into a minimal environment where you can perform some basic troubleshooting steps.
2. Check your file system: Once you are in recovery mode, use the fsck command to check your file system for errors. For example, you can run the command sudo fsck /dev/sda1 to check the file system on the first partition of your hard drive. Replace /dev/sda1 with the appropriate device name for your system. If fsck finds any errors, it will attempt to fix them.
3. Check your hard drive: If the file system check doesn't fix the issue, it's possible that your hard drive is failing. You can use the smartctl command to check the SMART status of your hard drive. For example, you can run the command sudo smartctl -a /dev/sda to check the status of the first hard drive on your system. Replace /dev/sda with the appropriate device name for your system.
4. Reinstall Deepin: If all else fails, you may need to reinstall Deepin. You can do this by booting from a Deepin installation media and selecting the "Install Deepin" option. During the installation process, you can choose to overwrite your existing installation of Deepin or install it alongside your existing installation. Khol's Survey

I hope these steps help you resolve the issue. If you continue to experience problems, you may want to seek help from a Linux expert or the Deepin community.