- 这是自己安装的吗,v23目前还没有适配哦
electron-ssr
也有一样的问题,运行后手动在网络代理里面指定了代理 ip 和端口,但是实际没有走代理;Qv2ray 倒是功能完全正常,代理可以正常生效。
请问你的clash在哪下载的,我下载好几个版本的都安装不了
我建议用 https://github.com/Dreamacro/clash 这个官方版本
我建议用 https://github.com/Dreamacro/clash 这个官方版本
这个版本只能用命令行。
这个版本只能用命令行。
命令很简单啊
1.准备config.yaml (我是从我的手机版本上clash上拿的,有谁知道怎么用订阅地址转出来可以说一下)
2.准备Country.mmdb (https://github.com/Dreamacro/maxmind-geoip/releases/tag/20230612)
3.准备clash (https://github.com/Dreamacro/clash/releases/tag/v1.17.0)(三个文件放一起,记得chmod 777 clash权限)
3.配置一个服务(/etc/systemd/system/clash.service)
[Unit]
Description=Clash
[Service]
Type=simple
Restart=always
ExecStart=/home/hiwhy/wanWork/software/clash/clash -d /home/hiwhy/wanWork/software/clash
[Install]
WantedBy=multi-user.target
4.sudo systemctl daemon-reload
5.sudo systemctl enable clash
6.sudo systemctl start clash
7.系统设置那里有个代理设置:手动
HTTP代理:127.0.0.1
端口:7890
HTTPS代理:127.0.0.1
端口:7890
保存
8.需要配置代理节点的话可以直接进网址里面 http://clash.razord.top 设置(全局,直连等都在里面设置)
我也一样,不管是命令行还是gui,设置好后开启,都访问不了外面,没有任何一条连接。
Popular Events
More
如图,已配置完毕了“系统代理”,代理却未被连接任何内容。
如何解决该问题?