首先说下电脑配置
华硕N53SM i7 2670qm 内存4g ,GT630M ,目前只显示3.77G内存,我安装的64位系统
我是用U盘安装,接下来我说说安装过程中出现的问题:
1.sandisk 8G在windows 7下显示为本地磁盘,当时的属性位FAT32,每种属性格式化后均无法解决。接下来麻烦的问题来了,深度启动器制作工具无法识别此盘,我更换数个版本的启动器,均无法识别。我解决的方法是用rufus U盘制作工具,足够小,只有1.2m,简洁明了。
2.我安装2RC过程中,在启动时出现屏幕上方闪现彩色条纹,但是能很快消失。
3.安装后进入时出现各位所说的那种情况,error: malformed file。但是可以正常进入,所以没管这个问题。
4.首次进入时在出现黑色鼠标时卡死,强制重启后问题消失。
5.进入后使用过程中dock消失不见,所有程序无法找到,桌面空空如也,就壁纸一张。只能强制重启,但问题依旧存在。
6.鼠标指针不停闪烁,始终无法解决。
7.电脑独立显卡指示灯一直亮着,风扇转速较高,我认为是系统在使用独立显卡导致的。因为linux我只是用来办公的,所以我不希望使用独立显卡,找了一些办法,始终没有解决。PS:我的电脑集成显卡指示灯时深蓝色的。
8.深度软件程序里面的所有软件提示未找到。
9.我其中有一个盘无法打开提示:无法访问 Media,
Error mounting /dev/sdb3 at /media/july/Media: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdb3" "/media/july/Media"' exited with non-zero exit status 13: $MFTMirr does not match $MFT (record 0).
Failed to mount '/dev/sdb3': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
这个问题在2014.1正式版上也存在,无解。
因为以上各种问题困扰,我又重新下载了2014.1正式版,安装后上述2.3.4.5.6.7.8问题都消失。但是问题9依然存在。
求助```求助~~~谢谢!!!
华硕N53SM i7 2670qm 内存4g ,GT630M ,目前只显示3.77G内存,我安装的64位系统
我是用U盘安装,接下来我说说安装过程中出现的问题:
1.sandisk 8G在windows 7下显示为本地磁盘,当时的属性位FAT32,每种属性格式化后均无法解决。接下来麻烦的问题来了,深度启动器制作工具无法识别此盘,我更换数个版本的启动器,均无法识别。我解决的方法是用rufus U盘制作工具,足够小,只有1.2m,简洁明了。
2.我安装2RC过程中,在启动时出现屏幕上方闪现彩色条纹,但是能很快消失。
3.安装后进入时出现各位所说的那种情况,error: malformed file。但是可以正常进入,所以没管这个问题。
4.首次进入时在出现黑色鼠标时卡死,强制重启后问题消失。
5.进入后使用过程中dock消失不见,所有程序无法找到,桌面空空如也,就壁纸一张。只能强制重启,但问题依旧存在。
6.鼠标指针不停闪烁,始终无法解决。
7.电脑独立显卡指示灯一直亮着,风扇转速较高,我认为是系统在使用独立显卡导致的。因为linux我只是用来办公的,所以我不希望使用独立显卡,找了一些办法,始终没有解决。PS:我的电脑集成显卡指示灯时深蓝色的。
8.深度软件程序里面的所有软件提示未找到。
9.我其中有一个盘无法打开提示:无法访问 Media,
Error mounting /dev/sdb3 at /media/july/Media: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdb3" "/media/july/Media"' exited with non-zero exit status 13: $MFTMirr does not match $MFT (record 0).
Failed to mount '/dev/sdb3': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
这个问题在2014.1正式版上也存在,无解。
因为以上各种问题困扰,我又重新下载了2014.1正式版,安装后上述2.3.4.5.6.7.8问题都消失。但是问题9依然存在。
求助```求助~~~谢谢!!!