已禁用n卡,单独用intel集成显卡
deepin 的截图好像有两种模式,一个是保存文件,一个是复制到剪贴板,不会自动复制到剪贴板一份,导致粘贴的时候不方便
deepin 的截图好像有两种模式,一个是保存文件,一个是复制到剪贴板,不会自动复制到剪贴板一份,导致粘贴的时候不方便
X11下没遇到过,
我看了设置的跟x11下一样的,应该是bug
你好,wayland模式下截图录屏无法粘贴,已经有bug跟踪了哈,感谢反馈,https://github.com/linuxdeepin/developer-center/issues/5178
你好,wayland模式下截图录屏无法粘贴,已经有bug跟踪了哈,感谢反馈,https://github.com/linuxdeepin/developer-center/issues/5178
研究一下wayland硬件下待机唤醒失败的问题,有时间可以提供远程,99.9999%失败率,我的这台笔记本电脑,看看都需要提供啥信息
研究一下wayland硬件下待机唤醒失败的问题,有时间可以提供远程,99.9999%失败率,我的这台笔记本电脑,看看都需要提供啥信息
经过与研发同事沟通,如果是能够确认是硬件层面问题的话,这种问题,可能多半是acpi导致的,acpi是一种由操作系统控制的电源管理标准,如果硬件层面配置错误,就会导致待机唤醒失败,这里给出的建议是尝试通过更新较高内核来解决哈
如果无法确认,可以执行复现动作后,获取并发送日志给我们分析哈:
1、dmesg > dm.log
2、sudo journalctl -S "20 min ago">20min.log
日志信息发送到[email protected]
经过与研发同事沟通,如果是能够确认是硬件层面问题的话,这种问题,可能多半是acpi导致的,acpi是一种由操作系统控制的电源管理标准,如果硬件层面配置错误,就会导致待机唤醒失败,这里给出的建议是尝试通过更新较高内核来解决哈
如果无法确认,可以执行复现动作后,获取并发送日志给我们分析哈:
1、dmesg > dm.log
2、sudo journalctl -S "20 min ago">20min.log
日志信息发送到[email protected]
x11本机以前也经常出现这种状况,在不断反馈下出现这种待机失败情况比较少见了,应该不是硬件的问题吧
经过与研发同事沟通,如果是能够确认是硬件层面问题的话,这种问题,可能多半是acpi导致的,acpi是一种由操作系统控制的电源管理标准,如果硬件层面配置错误,就会导致待机唤醒失败,这里给出的建议是尝试通过更新较高内核来解决哈
如果无法确认,可以执行复现动作后,获取并发送日志给我们分析哈:
1、dmesg > dm.log
2、sudo journalctl -S "20 min ago">20min.log
日志信息发送到[email protected]
已发送,我这电脑算老电脑了 硬件不新
已发送,我这电脑算老电脑了 硬件不新
经过与研发同事进行沟通,目前已回复邮件
powertop的图忘记贴了,这里补充一下,就是这个界面检查下pci的设备显示状态哈:
经过与研发同事沟通,如果是能够确认是硬件层面问题的话,这种问题,可能多半是acpi导致的,acpi是一种由操作系统控制的电源管理标准,如果硬件层面配置错误,就会导致待机唤醒失败,这里给出的建议是尝试通过更新较高内核来解决哈
如果无法确认,可以执行复现动作后,获取并发送日志给我们分析哈:
1、dmesg > dm.log
2、sudo journalctl -S "20 min ago">20min.log
日志信息发送到[email protected]
wayland 本来可进去 更新后就进不去了 退回就能进去nvdia 1050TI
经过与研发同事进行沟通,目前已回复邮件
powertop的图忘记贴了,这里补充一下,就是这个界面检查下pci的设备显示状态哈:
## System Information
PowerTOP Version 2.15 ran at Fri Dec 15 20:23:34 2023 Kernel Version Linux version 6.6.6-dppve-fslong System Name Notebook P65_P67RGRERANot Applicable CPU Information 8 Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz OS Information Deepin 23 Summary
CPU Idle
CPU Frequency
Software Info
Device Info
Tuning
AHCI
All
- Target: 1 units/s
- System: 1012.1 wakeup/s
- CPU: 16.8% usage
- GPU: 0 ops/s
- GFX: 0 wakeups/s
- VFS: 0 ops/s
Software Settings in Need of Tuning
Description Script VM writeback timeout echo '1500' > '/proc/sys/vm/dirty_writeback_centisecs'; NMI watchdog should be turned off echo '0' > '/proc/sys/kernel/nmi_watchdog'; Runtime PM for disk sda echo 'auto' > '/sys/block/sda/device/power/control'; Runtime PM for port ata1 of PCI device: Intel Corporation HM170/QM170 Chipset SATA Controller [AHCI Mode] echo 'auto' > '/sys/bus/pci/devices/0000:00:17.0/ata1/power/control'; Runtime PM for PCI Device Intel Corporation HM170/QM170 Chipset SATA Controller [AHCI Mode] echo 'auto' > '/sys/bus/pci/devices/0000:00:17.0/power/control'; Runtime PM for port ata2 of PCI device: Intel Corporation HM170/QM170 Chipset SATA Controller [AHCI Mode] echo 'auto' > '/sys/bus/pci/devices/0000:00:17.0/ata2/power/control'; Runtime PM for port ata3 of PCI device: Intel Corporation HM170/QM170 Chipset SATA Controller [AHCI Mode] echo 'auto' > '/sys/bus/pci/devices/0000:00:17.0/ata3/power/control'; Runtime PM for port ata4 of PCI device: Intel Corporation HM170/QM170 Chipset SATA Controller [AHCI Mode] echo 'auto' > '/sys/bus/pci/devices/0000:00:17.0/ata4/power/control'; Runtime PM for PCI Device Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller echo 'auto' > '/sys/bus/pci/devices/0000:00:1f.2/power/control'; Runtime PM for PCI Device Intel Corporation HM170 Chipset LPC/eSPI Controller echo 'auto' > '/sys/bus/pci/devices/0000:00:1f.0/power/control'; Runtime PM for PCI Device Intel Corporation Wireless 3165 echo 'auto' > '/sys/bus/pci/devices/0000:02:00.0/power/control'; Runtime PM for PCI Device Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers echo 'auto' > '/sys/bus/pci/devices/0000:00:00.0/power/control'; Runtime PM for PCI Device Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem echo 'auto' > '/sys/bus/pci/devices/0000:00:14.2/power/control'; Runtime PM for PCI Device Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller echo 'auto' > '/sys/bus/pci/devices/0000:00:14.0/power/control'; Runtime PM for disk sdb echo 'auto' > '/sys/block/sdb/device/power/control'; Untunable Software Issues
Description I2C Adapter i2c-19 has no runtime power management I2C Device 0-0037 has no runtime power management I2C Adapter i2c-23 has no runtime power management I2C Device 0-0053 has no runtime power management I2C Adapter i2c-18 has no runtime power management I2C Device 0-0036 has no runtime power management Optimal Tuned Software Settings
Description Enable Audio codec power management Enable SATA link power management for host1 Enable SATA link power management for host2 Enable SATA link power management for host0 Enable SATA link power management for host3 Bluetooth device interface status Runtime PM for I2C Adapter i2c-3 (nvkm-0000:01:00.0-bus-0002) Runtime PM for I2C Adapter i2c-4 (nvkm-0000:01:00.0-bus-0003) Runtime PM for I2C Adapter i2c-21 (i915 gmbus dpb) Runtime PM for I2C Adapter i2c-2 (nvkm-0000:01:00.0-bus-0001) Autosuspend for USB device xHCI Host Controller [usb2] Runtime PM for I2C Adapter i2c-13 (nvkm-0000:01:00.0-aux-0007) Autosuspend for unknown USB device 1-8 (8087:0a2a) Autosuspend for USB device xHCI Host Controller [usb1] Runtime PM for I2C Adapter i2c-22 (i915 gmbus dpd) Autosuspend for USB device BisonCam, NB Pro [Generic] Runtime PM for I2C Adapter i2c-10 (nvkm-0000:01:00.0-bus-0006) Runtime PM for I2C Adapter i2c-20 (i915 gmbus dpc) Runtime PM for I2C Adapter i2c-7 (nvkm-0000:01:00.0-aux-0004) Runtime PM for I2C Adapter i2c-12 (nvkm-0000:01:00.0-bus-0007) Runtime PM for I2C Adapter i2c-1 (nvkm-0000:01:00.0-bus-0000) Runtime PM for I2C Adapter i2c-17 (nvkm-0000:01:00.0-aux-0009) Runtime PM for I2C Adapter i2c-8 (nvkm-0000:01:00.0-bus-0005) Runtime PM for I2C Adapter i2c-0 (SMBus I801 adapter at f040) Runtime PM for I2C Adapter i2c-11 (nvkm-0000:01:00.0-aux-0006) Runtime PM for I2C Adapter i2c-15 (nvkm-0000:01:00.0-aux-0008) Runtime PM for I2C Adapter i2c-6 (nvkm-0000:01:00.0-bus-0004) Runtime PM for I2C Adapter i2c-9 (nvkm-0000:01:00.0-aux-0005) Runtime PM for I2C Adapter i2c-16 (nvkm-0000:01:00.0-bus-0009) Runtime PM for I2C Adapter i2c-5 (nvkm-0000:01:00.0-aux-0003) Runtime PM for I2C Adapter i2c-14 (nvkm-0000:01:00.0-bus-0008) Runtime PM for PCI Device NVIDIA Corporation GM204M [GeForce GTX 960 OEM / 970M] Runtime PM for PCI Device Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 Runtime PM for PCI Device Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) Runtime PM for PCI Device Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #6 Runtime PM for PCI Device Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller Runtime PM for PCI Device NVIDIA Corporation GM204 High Definition Audio Controller Runtime PM for PCI Device Intel Corporation HD Graphics 530 Runtime PM for PCI Device Intel Corporation 100 Series/C230 Series Chipset Family SMBus Wake status of the devices
Description Script Wake-on-lan status for device wlp2s0 echo 'enabled' > '/sys/class/net/wlp2s0/device/power/wakeup'; Wake status for USB device usb1 echo 'enabled' > '/sys/bus/usb/devices/usb1/power/wakeup'; Wake status for USB device 1-8 echo 'enabled' > '/sys/bus/usb/devices/1-8/power/wakeup'; Wake status for USB device usb2 echo 'enabled' > '/sys/bus/usb/devices/usb2/power/wakeup';
经过与研发同事进行沟通,目前已回复邮件
powertop的图忘记贴了,这里补充一下,就是这个界面检查下pci的设备显示状态哈:
怎么不一样,怎么切换到Tunables?
怎么不一样,怎么切换到Tunables?
切换使用tab键,回车改变状态,退出后重新进,状态未改变就是锁定选项了。
Popular Ranking
ChangePopular Events
More
wayland-Xorg日志.txt
wayland系统日志.txt
截图粘贴功能也有问题 截完图右键粘贴建是灰色的,键盘快捷键粘贴也是无用,截图看了在桌面上