[Kernel/Drive] deepin20.8博通无线网卡(BCM4313 802.11bgn)驱动安装
Tofloor
poster avatar
Vn
deepin
2022-12-11 05:30
Author

笔记本安装deepin20.8后无线网络选项没有,经过一番折腾终于安装上博通网卡驱动 BCM4313 802.11bgn

参考Debian的驱动安装 https://wiki.debian.org/brcm80211#Installation

1. 首先查看支持的网卡
 lspci | grep -i net

我的支持以下网卡

03:00.0 Network controller: Broadcom Inc. and subsidiaries BCM4313 802.11bgn Wireless Network Adapter (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)

2.无线网卡驱动貌似没有,要安装BCM4313 802.11bgn无线网卡驱动
  • apt install firmware-brcm80211, 如果遇到安装失败先卸载 apt autoremove linux-firmware试下
  • modprobe brcmsmac, 如果重启后无线网络不见,可将加到启动加载命令中
3.安装完无线网卡驱动,终于看到无线网络选项,不用重启电脑

image.png

Reply Favorite View the author
All Replies
jjcui8595
Moderator
2022-12-11 06:09
#1

感谢分享like

Reply View the author
我为添狂
deepin
2022-12-12 17:39
#2

您好,我的网卡是博通BCM43142,也是是没驱动,用您的方法还是不行,能否赐教下

Reply View the author
Vn
deepin
2022-12-16 03:16
#3
我为添狂

您好,我的网卡是博通BCM43142,也是是没驱动,用您的方法还是不行,能否赐教下

参考这个: https://wiki.debian.org/bcm43xx#b43_and_b43legacy

For devices with a BCM4312 LP-PHY chip (PCI ID 14E4:4315), install firmware-b43-installer:

apt-get install firmware-b43-installer

image.png

apt-get install firmware-b43-installer
Reply View the author
我为添狂
deepin
2023-01-11 00:49
#4
Vn

参考这个: https://wiki.debian.org/bcm43xx#b43_and_b43legacy

For devices with a BCM4312 LP-PHY chip (PCI ID 14E4:4315), install firmware-b43-installer:

apt-get install firmware-b43-installer

image.png

apt-get install firmware-b43-installer

好的,谢谢你的回复!

Reply View the author
159******55
deepin
2023-01-27 01:47
#5

第一步都没成功,能否再详细说明一下步骤kissing_heart

Reply View the author
9.9
deepin
2023-05-13 03:02
#6

image.png

请问我这个网卡是啥啊?折腾了一晚上都没成功

Reply View the author
宋佳盛
deepin
2023-06-17 03:20
#7

赞赞赞赞,解决了我的问题!

Reply View the author
小楼夜听雨
deepin
2023-08-22 10:41
#8

使用安装器安装firmware-brcm80211_20230515-3_all.deb,提示安装失败,这要怎么操作

Selecting previously unselected package firmware-brcm80211.
(Reading database ... 220002 files and directories currently installed.)
Preparing to unpack .../firmware-brcm80211_20230515-3_all.deb ...
Unpacking firmware-brcm80211 (20230515-3) ...
An error occurred while applying changes:
An error occurred while applying changes: dpkg: error processing archive /home/cobra923/Downloads/firmware-brcm80211_20230515-3_all.deb (--install):
trying to overwrite '/lib/firmware/brcm/bcm43xx-0.fw', which is also in package linux-firmware 1.202.8
dpkg-deb: error: paste subprocess was killed by signal (Broken pipe)
Errors were encountered while processing:
/home/cobra923/Downloads/firmware-brcm80211_20230515-3_all.deb

Reply View the author
jameslam316
deepin
2023-09-28 20:14
#9

小白先问一个幼稚问题,我用以上各种方法,都显示“权限不够”。。。

Reply View the author
枫叶林猢狲
deepin
2023-10-24 04:28
#10
jameslam316

小白先问一个幼稚问题,我用以上各种方法,都显示“权限不够”。。。

不知道你解决了没,你可以先输入"sudo",再输入楼上所说的命令

Reply View the author
伊人浅笑醉长安
deepin
2024-03-21 19:54
#11

感谢大佬,我安装成功了。

sudo apt install firmware-brcm80211, 如果遇到安装失败先卸载 apt autoremove linux-firmware试下

sudo modprobe brcmsmac, 如果重启后无线网络不见,可将加到启动加载命令中

Reply View the author
伊人浅笑醉长安
deepin
2024-03-22 16:02
#12

大佬,重启后又不见无线网卡了,怎么把modprobe brcmsmac将加到启动加载命令中?

Reply View the author
富贵
deepin
2024-04-15 09:11
#13

如何把命令“modprobe brcmsmac”加入系统启动??

Reply View the author