[Seek Help] 20.9增加23B3,回不去了
Tofloor
poster avatar
catubibu
deepin
2024-04-11 00:17
Author

单20.9增装双linux系统,23装好了,但是不知道该怎么进20.9了, 请大佬们看看该怎么办?20.9是工作环境唉

8,9是新装的23B3, 其他的都是20.9的分区

。。

安装过程:

多谢楼下各位大侠,我现在已经是23B3了,fixt5打字,哈哈。本来不难的事儿,折腾一下午到现在。汇报如下:

1.gparted改分区搞不定,全带着小钥匙,查英文网才知道要以USB系统开机,正在用的分区不能改。

2.下载23ISO和live浪费了很多时间,找不到快速源,结果到4点啥都没搞成就出去买菜了。
3.遛完狗开搞,找到了科技大的源,但是live还是下载其慢。
4.装好ventoy,把live搞上去,选择live,数次黑屏。
5.找到一个老mint, 自带Gparted,把我1.7的豪华数据盘砍出一大半空间。
6.用ventoy开机,选择23B3iso,出现了安装界面。
丝滑装机,除了应用商店货很少,似乎和20.9没啥区别。找到了ineasemusic代替网易云音乐,没有任何设置的地方,很简洁,凑合用。到360官网下了UOS版的安全浏览器,用习惯了,外加一颗国人心。。。唉。
第一个烦恼来了,怎么进我的20.9呢?原系统是单20.9, 安装23B3过程中似乎没有什么双系统的选项,怎么办?

大结局:

a. 用mint live开机,gparted把23B3的两个分区删掉。拔掉Mint USB, 原20.9黑屏。插mint USB 重新开机, 用mint自带的 boot repair修复引导后正常进入20.9, 系统可以说恢复到了上面第5步的状态

b. 用ventoy重装23B3,手动安装还和之前一样,只有23B3,没有20.9.还尝试了修改20.9分区的flag, 如后附英文的安装步骤,没用。

c. 重复a步骤和b步骤,安好23B3后用mint USB引导开机,用boot repair修复引导区, 开机后出现三个选项23b3和两个20.9, 两个20.9就是a.b分区,你懂得。

d. 试了试23b3,最不满意还是网易音乐,平时开电脑就不停,23b3的那个代替品还是太简陋了, fcxit5感觉能适应, 目前就这样吧,没事玩玩,继续用20.9干活。

截图_选择区域_20240411001541.png

Reply Favorite View the author
All Replies
兆兆嘟嘟嘟
deepin
2024-04-11 00:48
#1

@晚秋(lateautumn)你当时怎么正常用三系统的,帮忙看一下。

Reply View the author
晚秋(lateautumn)
Moderator
2024-04-11 09:40
#2
兆兆嘟嘟嘟

@晚秋(lateautumn)你当时怎么正常用三系统的,帮忙看一下。

不会是完全安装了吧。装23时是选择的手动安装吗?

Reply View the author
catubibu
deepin
2024-04-11 10:28
#3
晚秋(lateautumn)

不会是完全安装了吧。装23时是选择的手动安装吗?

谢谢,完全安装,都是默认第一选项。

现在用老mint把23B3干掉unallocated了,然后用mint自带boot repair修复20.9,拔掉USB mint,开机就回到了20.9。不修复的话,开机进mint的grub,end up nowhere,完全搞不懂。

发现了一些装第二个linux的指南,晚上再战再报。

Reply View the author
晚秋(lateautumn)
Moderator
2024-04-11 10:37
#4
catubibu

谢谢,完全安装,都是默认第一选项。

现在用老mint把23B3干掉unallocated了,然后用mint自带boot repair修复20.9,拔掉USB mint,开机就回到了20.9。不修复的话,开机进mint的grub,end up nowhere,完全搞不懂。

发现了一些装第二个linux的指南,晚上再战再报。

那就对了,完全安装,肯定把209给灭了。我装多系统,一般都是先装瘟疫系统,在瘟疫系统里分好区,再手动安装别的系统。虽然瘟疫系统不常用了,但目前阶段,还是得留着备用一下。applaud

Reply View the author
catubibu
deepin
2024-04-12 10:23
#5

这是改分区flag的出处

nstructions are simple.

Booting Linux Mint Live USB on UEFI mode first you need to un-flag EFI partition on first vanessa disk.
Run Gparted (Menu> Administration>Gparted), Select nvme0n1 on menu and EFI partition (nvme0n1p1) right click on it>Manage flags> uncheck esp (automatically boot will be unchecked and checked msftdata). Remember to undo this (that is re-flag) after installing Second Vanessa and before rebooting.

You can close Gparted now and install Mint on the other disk.
Click on Install Linux Mint shortcut on desktop...), choose Language>Keyboard>...When you get the moment to choose option to install take into account;

image.png

-if choosing Erase all and install , it will install on both BIOS legacy mode and UEFI. It is ok as your boot mode looks like to be is UEFI only and the you can disconnect that disk and attached it to another BIOS computer if you want.
Select that drive (sdb disk) and click on Install Now .

It will auto-partition the disk on GPT partition scheme with three partitions (1MB bios-boot, 515 MB FAT 32 EFI and root) even I will advise I will create only two partition sdb2 ESP and sdb3 root click on Continue to complete.
-If choosing Something else... option you can decide if installing on BIOS Legacy mode, UEFI or both. Supposing you want to install on UEFI mode only:
-select that sdb disk and click on New partition Table button. It will create a GPT portioning scheme by default.

-Create an EFI partition. Select unallocated space, right click on it>click on add(+) button. Complete pop-up accordingly 512 MB at beginning, use as EFI system boot >Click add.

-Then create a root partition with rest of free space. Select unallocated space>click on add (+) button and complete pop-up window accordingly (whole space, use as ext.4 mount point /, check to format).

-Be sure loader will be placed on sdb drive on Device for boot loader installation menu downside.

-Then you can go on installing click on Install now.. You will receive a waning about a BIOS reserved boot partition is needed, just ignore it and click on Continue.

image.png

In both cases continue running Linux Mint Live session when finished (do not shutdow) and then run Gparted again to re-flag EFI partititon(nvme0n1p1) on first vanessa disk (Menu>Administration> Gparted> Select nvme0n1>......)

Then reboot.
Last edited by Jo-con-Ël on Tue Jan 24, 2023 5:38 am, edited 2 times in total.

Reply View the author